International GAAP® 2019: Generally Accepted Accounting Practice under International Financial Reporting Standards

Home > Other > International GAAP® 2019: Generally Accepted Accounting Practice under International Financial Reporting Standards > Page 523
International GAAP® 2019: Generally Accepted Accounting Practice under International Financial Reporting Standards Page 523

by International GAAP 2019 (pdf)


  When considered in combination with the non-transferability of the options (see 8.2.3.A

  above), this means that exercising the options is the only way to remove exposure to

  fluctuations in value, which lowers the value of the options.

  8.2.3.F Dilution

  effects

  When third parties write traded share options, the writer delivers shares to the option

  holder when the options are exercised, so that the exercise of the traded share options

  has no dilutive effect. By contrast, if an entity writes share options to employees and,

  when those share options are exercised, issues new shares (or uses shares previously

  repurchased and held in treasury) to settle the awards, there is a dilutive effect as a result

  of the equity-settled awards. As the shares will be issued at the exercise price rather

  than the current market price at the date of exercise, this actual or potential dilution

  may reduce the share price, so that the option holder does not make as large a gain as

  would arise on the exercise of similar traded options which do not dilute the share price.

  8.3

  Selection of an option-pricing model

  Where, as will almost always be the case, there are no traded options over the entity’s

  equity instruments that mirror the terms of share options granted to employees, IFRS 2

  requires the fair value of options granted to be estimated using an option-pricing model.

  The entity must consider all factors that would be considered by knowledgeable, willing

  market participants in selecting a model. [IFRS 2.B4-5].

  The IASB decided that it was not necessary or appropriate to prescribe the precise

  formula or model to be used for option valuation. It notes that there is no particular

  option pricing model that is regarded as theoretically superior to the others, and there

  is the risk that any model specified might be superseded by improved methodologies in

  the future. [IFRS 2.BC131].

  The three most common option-pricing methodologies for valuing employee options are:

  • the Black-Scholes-Merton formula (see 8.3.1 below);

  • the binomial model (see 8.3.2 below); and

  • the Monte Carlo Simulation (see 8.3.3 below).

  2620 Chapter 30

  It is important to understand all the terms and conditions of a share-based payment

  arrangement, as this will influence the choice of the most appropriate option

  pricing model.

  IFRS 2 names the Black-Scholes-Merton formula and the binomial model as examples

  of acceptable models to use when estimating fair value, [IFRS 2.BC152], while noting that

  there are certain circumstances in which the Black-Scholes-Merton formula may not

  be the most appropriate model (see 8.3.1 below). Moreover, there may be instances

  where, due to the particular terms and conditions of the share-based payment

  arrangement, neither of these models is appropriate, and another methodology is more

  appropriate to achieving the intentions of IFRS 2. A model commonly used for valuing

  more complex awards is Monte Carlo Simulation (often combined with the Black-

  Scholes-Merton formula or the binomial model). This can deal with the complexities of

  a plan such as one with a market condition based on relative total shareholder return

  (TSR), which compares the return on a fixed sum invested in the entity to the return on

  the same amount invested in a peer group of entities.

  8.3.1

  The Black-Scholes-Merton formula

  The Black-Scholes-Merton methodology is commonly used for assessing the value of a

  freely-traded put or call option and allows for the incorporation of static dividends on

  shares. The assumptions underlying the Black-Scholes-Merton formula are as follows:

  • the option can be exercised only on the expiry date (i.e. it is a European option);

  • there are no taxes or transaction costs and no margin requirements;

  • the volatility of the underlying asset is constant and is defined as the standard

  deviation of the continuously compounded rates of return on the share over a

  specified period;

  • the risk-free interest rate is constant over time;

  • short selling is permitted;

  • there are no risk-free arbitrage opportunities;

  • there are log normal returns (i.e. the continuously compounded rate of return is

  normally distributed); and

  • security trading is continuous.

  The main limitation of the Black-Scholes-Merton methodology is that it only calculates

  the option price at one point in time. It does not consider the steps along the way when

  there could be a possibility of early exercise of an American option (although as

  discussed at 8.4 below this can be partially mitigated by using an assumed expected term

  as an input to the calculation).

  The Black-Scholes-Merton formula is an example of a closed-form model, which is a

  valuation model that uses an equation to produce an estimated fair value. The formula

  is as shown in Figure 30.4 below.

  Share-based

  payment

  2621

  Figure 30.4:

  The Black-Scholes-Merton formula

  c = S0e–qTN(d1) – Ke–rTN(d2)

  Where:

  ln(S0/K) + (r–q+σ2/2)T

  d

  1 =

  σ √T

  d2 = d1 – σ √T

  c =

  price of a written call

  S0 =

  price of the underlying share

  N =

  the cumulative probability distribution function for a standardised normal distribution

  q =

  dividend yield (continuously compounded)

  K =

  call option exercise price

  r =

  the continuously compounded risk-free rate

  σ =

  annualised volatility of the underlying share

  T =

  time to expiry (in years)

  Note:

  ‘e’ represents the mathematical constant, the base of the natural logarithm (2.718282...), and

  ‘ln’ is the natural logarithm of the indicated value

  Whilst the Black-Scholes-Merton formula is complex, its application in practice is

  relatively easy. It can be programmed into a spreadsheet, and numerous programs and

  calculators exist that use it to calculate the fair value of an option. As a result, the formula

  is used widely by finance professionals to value a large variety of options. However, a

  number of the assumptions underlying the formula may be better suited to valuing

  short-term, exchange-traded share options rather than employee share options.

  The attributes of employee share options that render the Black-Scholes-Merton

  formula less effective as a valuation technique include:

  • Long term to expiry

  The formula assumes that volatility, interest rates and dividends are constant over the

  life of the option. While this may be appropriate when valuing short-term options,

  the assumption of constant values is less appropriate when valuing long-term options.

  • Non-transferability and early exercise

  The formula assumes a fixed maturity/exercise date. While IFRS 2 provides for the use

  of an ‘expected term’ in place of the contractual life to reflect the possibility of early

  exercise resulting from the non-transferability of employee share options or other

  reasons (see 8.5 below), this may
not adequately describe early exercise behaviour.

  • Vesting conditions and non-vesting conditions

  The formula does not take into account any market-based vesting conditions or

  non-vesting conditions.

  • Blackout periods

  As the formula assumes exercise on a fixed date, and does not allow earlier exercise,

  it does not take into consideration any blackout periods (see 8.2.3.D above).

  2622 Chapter 30

  In summary, application of the Black-Scholes-Merton formula is relatively simple, in

  part because many of the complicating factors associated with the valuation of

  employee share options cannot be incorporated into it directly and, therefore, must be

  derived outside of the formula (e.g. the input of an expected term).

  IFRS 2 states that the Black-Scholes-Merton formula may not be appropriate for long-

  lived options which can be exercised before the end of their life and which are subject to

  variation in the various inputs to the model over the life of the option. However, IFRS 2

  suggests that the Black-Scholes-Merton formula may give materially correct results for

  options with shorter lives and with a relatively short exercise period. [IFRS 2.B5].

  The development of appropriate assumptions for use in the Black-Scholes-Merton

  formula is discussed at 8.5 below.

  As noted above, the Black-Scholes-Merton formula is an example of a closed form

  model that is not generally appropriate for awards that include market performance

  conditions. However, in certain circumstances it may be possible to use closed form

  solutions other than the Black-Scholes-Merton formula to value options where, for

  example, the share price has to reach a specified level for the options to vest. These

  other solutions are beyond the scope of this chapter.

  8.3.2

  The binomial model

  The binomial model is one of a subset of valuation models known as lattice models, which

  adopt a flexible, iterative approach to valuation that can capture the unique aspects of

  employee share options. A binomial model produces an estimated fair value based on the

  assumed changes in prices of a financial instrument over successive periods of time. In

  each time period, the model assumes that at least two price movements are possible. The

  lattice represents the evolution of the value of either a financial instrument or a market

  variable for the purpose of valuing a financial instrument.

  The concepts that underpin lattice models and the Black-Scholes-Merton formula are

  the same, but the key difference between a lattice model and a closed-form model is

  that a lattice model is more flexible. The valuations obtained using the Black-Scholes-

  Merton formula and a lattice model will be very similar if the lattice model uses identical

  assumptions to the Black-Scholes-Merton calculation (e.g. constant volatility, constant

  dividend yields, constant risk-free rate, the same expected life). However, a lattice

  model can explicitly use dynamic assumptions regarding the term structure of volatility,

  dividend yields, and interest rates.

  Further, a lattice model can incorporate assumptions about how the likelihood of early

  exercise of an employee share option may increase as the intrinsic value of that option

  increases, or how employees may have a high tendency to exercise options with

  significant intrinsic value shortly after vesting.

  In addition, a lattice model can incorporate market conditions that may be part of the

  design of an option, such as a requirement that an option is only exercisable if the

  underlying share price reaches a certain level (sometimes referred to as ‘target share

  price’ awards). The Black-Scholes-Merton formula is not generally appropriate for

  awards that have a market-based performance condition because it cannot handle that

  additional complexity.

  Share-based

  payment

  2623

  Most valuation specialists believe that lattice models, through their versatility,

  generally provide a more accurate estimate of the fair value of an employee share

  option with market performance conditions or with the possibility of early exercise

  than a value based on a closed-form Black-Scholes-Merton formula. As a general rule,

  the longer the term of the option and the higher the dividend yield, the larger the

  amount by which the binomial lattice model value may differ from the Black-Scholes-

  Merton formula value.

  To implement the binomial model, a ‘tree’ is constructed the branches (or time steps) of

  which represent alternative future share price movements over the life of the option. In

  each time step over the life of the option, the share price has a certain probability of

  moving up or down by a certain percentage amount. It is important to emphasise the

  assumption, in these models, that the valuation occurs in a risk-neutral world, where

  investors are assumed to require no extra return on average for bearing risks and the

  expected return on all securities is the risk-free interest rate.

  To illustrate how the binomial model is used, Example 30.33 below constructs a simple

  binomial lattice model with a few time steps. The valuation assumptions and principles

  will not differ in essence from those in a Black-Scholes-Merton valuation except that

  the binomial lattice model will allow for early exercise of the option. The relevant

  difference between the two models is the specification of a very small number of time

  steps, for illustrative purposes, in the binomial lattice model (see also 8.3.2.A below). We

  discuss below how the model can be augmented for a more complex set of assumptions.

  Example 30.33: Binomial model

  A share option is issued with an exercise price of $10, being the share price on the grant date. This Example

  assumes a constant volatility (50%) and risk-free rate (5% continuously compounded) although, as discussed

  later, those static assumptions may not be appropriate when valuing a long-term share option. It is also

  assumed that: the grantor pays dividends with a yield of 2% (continuously compounded) on its shares; the

  term of the option is five years; and each branch of the tree represents a length of time of one year.

  At t = 0 (the grant date), the model is started at the grant date share price ($10 in this Example). At each node

  (the base of any price time step), two possible price changes (one increase and one decrease) are computed

  based on the volatility of the shares. The two new share prices are computed as follows:

  The up-node price utilises the following formula:

  u = eσ√dt = e0.5*√1 = 1.6487

  Where:

  σ = annualised volatility of the underlying share

  dt = period of time between nodes

  The down-node is the inverse of the up-node:

  1

  1

  d =

  =

  = 0.6065

  u

  1.6487

  The probability of each upward and downward price movement occurring is calculated from:

  • the probability of an upward movement in price:

  e(r–q)dt – d

  e(.05–.02)*1 – 0.6065

  p =

  =

  = 0.4068

  u – d

  1.6487 – 0.6065

  2624 Chapter 30

  Where:

  r = continuously compounded risk-free rate
<
br />   q = dividend yield (continuously compounded)

  dt = period of time between nodes

  • the probability of a downward movement in price:

  = 1 – p = 1 – 0.4068 = 0.5932

  Using the above price multiples, the price tree can then be constructed as shown diagrammatically below –

  each rising node is built by multiplying the previous price by ‘u’ and each falling node is similarly calculated

  by multiplying the previous price by ‘d’.

  Assumptions:

  S5,5

  Share price

  $10

  121.82

  Exercise price

  $10

  Risk-free rate

  5%

  S4,4

  111.82

  Dividend yield

  2%

  Volatility

  50%

  73.89

  Life/Term

  5 years

  S3,3

  63.89

  S5,4

  44.82

  44.82

  S2,2

  34.82

  S4,3

  34.82

  27.18

  27.18

  S1,1

  18.02

  S3,2

  17.18

  S5,3

  16.49

  16.49

  16.49

  S0,0

  9.04

  S2,1

  8.06

  S4,2

  4.42

  6.49

  Share price

  10.00

  10.00

  10.00

  Option FV

  4.42

  S1,0

  3.67

  S3,1

  4.42

  2.51

  S5,2

  6.07

  6.07

  6.07

  1.63

  S2,0

  4.42

  0.97

  S4,1

  4.42

  0.00

  3.68

  3.68

  0.38

  S3,0

  4.42

  0.00

  S5,1

  2.23

  2.23

  0.00

  S4,0

  0.00

  1.35

  0.00

  S5,0

  0.82

  0.00

  Time/Years

  0.0

  1.0

  2.0

  3.0

  4.0

  5.0

  To calculate the option value:

 

‹ Prev