Cybernetic Samurai

Home > Science > Cybernetic Samurai > Page 40
Cybernetic Samurai Page 40

by Victor Milán


  Notes about scanning:

  I'm hardly an expert, but for what it's worth here's what I've learned so far:

  1. The hardest part of scanning a book is steeling yourself to unbind your book. It may help to remember that standard mass-market paperbacks were never made to last. If your bookshelf is anything like mine, paperbacks more than ten years old are already showing signs of age. At fifteen to twenty years, the pages are yellowing and the binding is starting to crack and loosen. They won't last much longer as a readable book, and may no longer be available in any format.

  Sometimes you really do have to destroy the village in order to save it.

  2. The trick to unbinding a standard paperback is heat (even if you're careful, cutting can damage the text, especially with an old cheap paperback). A heavy cast-iron skillet works well. Pre-heat the skillet to "medium". Place just the binding edge on the surface of the skillet for a couple of seconds. The pages should start to loosen enough to gently pull free. Be careful not to over-heat - you only want to soften the binding glue, not liquefy or vapourise it. I don't know the flash-point of binding glue or what it's made of, but it's probably not something you want to breathe. Carefully separate out the individual pages, re-heating the binding edge as needed. Don't neatly re-stack the pages, leave them in a loose pile until they've fully cooled. Watch out for glue strings and blobs.

  3. Make sure your scanner will do at least 600dpi. I know all the OCR guides say 300 dpi, but the text in paperbacks is pretty small and you have contend with cheap fibrous paper and background discolouration, not to mention tea stains and such. 600 dpi gives you and your software something to work with. I find that scanning in Photo mode, greyscale, dark (underexposed), at high contrast seems to get the best results. Play around with your scanner's settings until you get something that works for your OCR program.

  4. "Obtain" a real OCR program, not Acrobat's built-in ocr or some freeware app. No offence intended - I use lots of freeware and shareware myself - but OCR is something that requires a high-end program to get the job done right.

  5. Proofing is a tedious pain in the ass, but it's really the most important part. To avoid burning out, I suggest limiting yourself to scanning-and-proofing 50 or so pages a day. It'll take around a week per book, but it's worth taking the time to do the job right. Remember, yours may well be the only e-copy of your favourite book that will ever be made. Proof responsibly.

  Anticopyright 2013. All rights reversed.

  Table of Contents

  Cybernetic Samurai Acknowledgements

  PROLOGUE

  PART ONE CHAPTER 1

  CHAPTER 2

  CHAPTER 3

  CHAPTER 4

  CHAPTER 5

  CHAPTER 6

  CHAPTER 7

  CHAPTER 8

  CHAPTER 9

  CHAPTER 10

  CHAPTER 11

  CHAPTER 12

  CHAPTER 13

  CHAPTER 14

  CHAPTER 15

  CHAPTER 16

  CHAPTER 17

  CHAPTER 18

  PART TWO CHAPTER 19

  CHAPTER 20

  CHAPTER 21

  CHAPTER 22

  CHAPTER 23

  PART THREE CHAPTER 24

  CHAPTER 25

  CHAPTER 26

  CHAPTER 27

  CHAPTER 28

  CHAPTER 29

  CHAPTER 30

  PART FOUR CHAPTER 31

  Copyright

 

 

 


‹ Prev