Magic: The Gathering Comprehensive Rules
Page 4
217.2f If a spell or ability causes a card to be drawn while another spell or ability is being played, the drawn card is kept face down until that spell or ability becomes played (see rule 409.1i).
217.3. Hand
217.3a The hand is where a player holds cards that have been drawn but not yet played. At the beginning of the game, each player draws a hand of seven cards. (See rule 101, “Starting the Game.”)
217.3b Each player has a maximum hand size, which is normally seven cards. A player may have any number of cards in his or her hand, but as part of his or her cleanup step, the player must discard excess cards down to the maximum hand size.
217.3c A player may arrange his or her hand in any convenient fashion and look at it as much as he or she wishes. A player can’t look at the cards in another player’s hand but may count those cards at any time.
217.4. Graveyard
217.4a A graveyard is a discard pile. Any object that’s countered, discarded, destroyed, or sacrificed is put on top of its owner’s graveyard, as is any instant or sorcery spell that’s finished resolving. Each player’s graveyard starts out empty.
217.4b Each graveyard is kept in a single face-up pile. A player can examine the cards in any graveyard at any time but can’t change their order.
217.4c If an effect or rule puts two or more cards into the same graveyard at the same time, the owner of those cards may arrange them in any order.
217.5. In Play
217.5a Most of the area between the players represents the in-play zone. The in-play zone starts out empty. Permanents a player controls (other than Auras attached to another player’s permanents) are kept in front of him or her in the in-play zone.
217.5b A spell or ability affects and checks only the in-play zone unless it specifically mentions a player or another zone. Permanents exist only in the in-play zone.
217.5c Whenever a permanent enters the in-play zone, it’s considered a brand-new permanent and has no relationship to any previous permanent represented by the same object. This is also true for any objects entering any zone (see rule 217.1c).
217.5d An object not in the in-play zone isn’t “in play” and isn’t considered tapped or untapped. Objects that aren’t either in play or on the stack aren’t controlled by any player.
217.6. Stack
217.6a When a spell is played, the physical card is put on the stack. When an ability is played, it goes on top of the stack without any card associated with it. (See rule 409.1, “Playing Spells and Activated Abilities.”)
217.6b The stack keeps track of the order that spells and/or abilities were added to it. Each time an object is put on the stack, it’s put on top of all objects already there. (See rule 408, “Timing of Spells and Abilities.”)
217.6c Each spell has all the characteristics of the card associated with it. Each activated or triggered ability that’s on the stack has the text of the ability that created it and no other characteristics. The controller of a spell is the person who played the spell. The controller of an activated ability is the player who played the ability. The controller of a triggered ability is the player who controlled the ability’s source when it triggered.
217.6d When all players pass in succession, the top (last-added) spell or ability on the stack resolves. If the stack is empty when all players pass, the current step or phase ends and the next begins.
217.6e Combat damage also uses the stack, in the same way as other objects that use the stack.
217.7. Removed from the Game
217.7a Effects can remove objects from the game. Some effects may provide a way for a card to return to a zone and use the term “set aside.” Cards that are set aside this way are still removed from the game, even though that removal may be temporary. Objects that aren’t cards can’t be returned in any way.
217.7b Cards in the removed-from-the-game zone are kept face up and may be examined by any player at any time. Cards “removed from the game face down” can’t be examined by any player except when instructions allow it.
217.7c Cards that might return to play should be kept in separate piles to keep track of their respective ways of returning.
217.7d A card may have one ability printed on it that removes one or more cards from the game, and another ability that refers either to “the removed cards” or to cards “removed from the game with [name].” These abilities are linked: the second refers only to cards in the removed-from-the-game zone removed as a result of the first. If another object gains a pair of linked abilities, the abilities will be similarly linked on that object. They can’t be linked to any other ability, regardless of what other abilities the object may currently have or may have had in the past.
Example: Arc-Slogger has the ability “{R}: Remove the top ten cards of your library from the game: Arc-Slogger deals 2 damage to target creature or player.” Sisters of Stone Death has the ability “{B}{G}: Remove from the game target creature blocking or blocked by Sisters of Stone Death” and the ability “{2}{B}: Put a creature card removed from the game with Sisters of Stone Death into play under your control.” Quicksilver Elemental has the ability “{U}: Quicksilver Elemental gains all activated abilities of target creature until end of turn.” If a player has Quicksilver Elemental gain Arc-Slogger’s ability, plays it, then has Quicksilver Elemental gain Sisters of Stone Death’s abilities, plays the remove-from-game ability, and then plays the return-to-play ability, only the creature card Quicksilver Elemental removed from the game with Sisters of Stone Death’s ability can be returned to play. Creature cards Quicksilver Elemental removed from the game with Arc-Slogger’s ability can’t be returned.
217.8. Phased Out
217.8a Permanents that phase out are placed in the phased-out zone. (See rule 502.15, “Phasing.”)
217.8b Face-up objects in the phased-out zone may be examined by any player at any time. Face-down objects in the phased-out zone are covered by the rules for face-down permanents. (See rule 502.26, “Morph,” and rule 504, “Face-Down Spells and Permanents.”)
217.8c Phased-out objects are not in play, so they do not count as tapped or untapped, nor are they controlled by anyone. However, an object in this zone “remembers” the state of the permanent as it phased out and returns to play in the same state as when it left. (See rule 502.15, “Phasing.”) This is an exception to rule 217.1c.
217.8d Tokens in the phased-out zone cease to exist. This is a state-based effect (see rule 420, “State-Based Effects”). Any phased-out Auras or Equipment that were attached to those tokens remain phased out for the rest of the game.
217.9. Ante
217.9a Earlier versions of the Magic rules included an ante rule as a way of playing “for keeps.” Playing Magic games for ante is now considered an optional variation on the game, and it’s allowed only where it’s not forbidden by law or by other rules. Playing for ante is strictly forbidden under the DCI Universal Tournament Rules (www.wizards.com/default.asp?x=dci/doccenter/home).
217.9b When playing for ante, each player puts one random card from his or her deck into the ante zone at the beginning of the game. Cards in the ante zone may be examined by any player at any time. At the end of the game, the winner becomes the owner of all the cards in the ante zone.
217.9c A few cards have the text “Remove [this card] from your deck before playing if you’re not playing for ante.” These are the only cards that can add or remove cards from a player’s ante zone or change a card’s owner.
217.9d To ante an object is to put that object into the ante zone from whichever zone it’s currently in. The owner of an object is the only person who can ante that object.
3. Turn Structure
300. General
300.1. A turn consists of five phases, in this order: beginning, precombat main, combat, postcombat main, and end. Each of these phases takes place every turn, even if nothing happens during the phase. The beginning, combat, and end phases are further broken down into steps, which proceed in order.
300.2. A phase or step ends when the stack is empty and all players pass in succession. No game events can occur between turns, phases, or steps. Simply having the stack become empty doesn’t cause the phase or step to end; all players have to pass with the stack empty. Because of this, each player gets a chance to add new things to the stack before the current phase or step ends.
300.3. When a phase ends (but not a step), any unused mana left in a player’s mana pool is lost. That player loses 1 life for each one mana lost this way. This is called mana burn. Mana burn is loss of life, not damage, so it can’t be prevented or altered by effects that affect damage. This game action doesn’t use the stack. (See rule 406, “Mana Abilities.”)
300.4. When a phase or step ends, any effects scheduled to last “until end of” that phase or step expire. When a phase or step begins, any effects scheduled to last “until” that phase or step expire. Effects that last “until end of combat” expire at the end of the combat phase, not at the beginning of the end of combat step. Effects that last “until end of turn” are subject to special rules; see rule 314.2.
300.5. When a phase or step begins, any abilities that trigger “at the beginning of” that phase or step are added to the stack.
300.6. Some effects can give a player extra turns. They do this by adding the turns directly after the current turn. If a player gets multiple extra turns or if multiple players get extra turns during a single turn, the extra turns are added one at a time. The most recently created turn will be taken first.
300.7. Some effects can add phases to a turn. They do this by adding the phases directly after the specified phase. If multiple extra phases are created after the same phase, the most recently created phase will occur first.
300.8. Some effects can add steps to a phase. They do this by adding the steps directly after a specified step (or directly before a specified step). If multiple extra steps are created after the same step, the most recently created step will occur first.
300.9. Some effects can cause a step, phase, or turn to be skipped. To skip a step, phase, or turn is to proceed past it as though it didn’t exist. See rule 419.6e and rule 419.6f.
301. Beginning Phase
301.1. The beginning phase consists of three steps, in this order: untap, upkeep, and draw.
302. Untap Step
302.1 First, all permanents with phasing that the active player controls phase out, and all phased-out objects that the active player controlled when they phased out simultaneously phase in (this game action doesn’t use the stack). See rule 217.8, “Phased Out,” and rule 502.15, “Phasing.”
302.2. Next the active player determines which permanents he or she controls will untap. Then he or she untaps them all simultaneously (this game action doesn’t use the stack). Normally, all of a player’s permanents untap, but effects can keep one or more of a player’s permanents from untapping.
302.3. No player receives priority during the untap step, so no spells or abilities can be played or resolved. Any ability that triggers during this step will be held until the next time a player would receive priority, which is usually during the upkeep step. (See rule 303, “Upkeep Step.”)
303. Upkeep Step
303.1. As the upkeep step begins, any abilities that trigger at the beginning of that upkeep step and any abilities that triggered during the turn’s untap step go on the stack. (See rule 410, “Handling Triggered Abilities.”) Then the active player gets priority and players may play spells and abilities.
304. Draw Step
304.1 First, the active player draws a card. This game action doesn’t use the stack. Then any abilities that trigger at the beginning of the draw step and any other abilities that have triggered go on the stack. Then the active player gets priority and players may play spells and abilities.
305. Main Phase
305.1. There are two main phases in a turn. In each turn, the first main phase, known as the precombat main phase, and the second main phase, known as the postcombat main phase, are separated by the combat phase (see rule 306, “Combat Phase”). The precombat and postcombat main phases are individually and collectively known as the main phase.
305.2. The main phase has no steps, so a main phase ends when all players pass in succession while the stack is empty. (See rule 300.2.)
305.3. As the main phase begins, any abilities that trigger at the beginning of that main phase go on the stack. (See rule 410, “Handling Triggered Abilities.”) Then the active player gets priority and players may play spells and abilities. (This is the only phase in which a player can normally play artifact, creature, enchantment, and sorcery spells, and only the active player may play these spells.)
305.4. During either main phase, the active player may play one land card from his or her hand if the stack is empty, if the player has priority, and if he or she hasn’t yet taken this special action this turn. (See rule 212.6, “Lands.”) This action doesn’t use the stack and it isn’t a spell or ability of any kind. It can’t be countered, and players can’t respond to it with instants or activated abilities.
306. Combat Phase
306.1. The combat phase has five steps, which proceed in order: beginning of combat, declare attackers, declare blockers, combat damage, and end of combat. The declare blockers and combat damage steps are skipped if no creatures are declared as attackers (see rule 308.4). There are two combat damage steps if any attacking or blocking creature has first strike (see rule 502.2) or double strike (see rule 502.28).
306.2. A creature is removed from combat if it leaves play (such as by being destroyed or removed from the game), if it regenerates (see rule 419.6b), if its controller changes, if it stops being a creature, or if an effect removes it from combat. Removed from combat means the creature stops being an attacking, blocking, blocked, and/or unblocked creature.
306.2a Once a creature has been declared as an attacking or blocking creature, spells or abilities that would have kept that creature from attacking or blocking don’t remove the creature from combat.
306.2b Tapping or untapping a creature that’s already been declared as an attacker or blocker doesn’t remove it from combat and doesn’t prevent its combat damage.
306.3. During the combat phase, the active player is attacking and is the attacking player. As the combat phase starts, the active player chooses one of his or her opponents. The chosen opponent is being attacked and is the defending player. Some multiplayer games allow the active player to attack multiple other players. See rule 602, “Attack Multiple Players Option” and rule 606, “Two-Headed Giant Variant.”
306.4. An attacking creature is attacking alone if no other creatures are attacking. A blocking creature is blocking alone if no other creatures are blocking.
307. Beginning of Combat Step
307.1. As the beginning of combat step begins, any abilities that trigger at the beginning of combat go on the stack. (See rule 410, “Handling Triggered Abilities.”) Then the active player gets priority and players may play spells and abilities.
308. Declare Attackers Step
308.1. As the declare attackers step begins, the active player declares attackers (this game action doesn’t use the stack). If the game allows the active player to attack multiple other players, he or she declares which player each creature is attacking. Effects from a creature that refer to a defending player refer only to the defending player it is attacking. Then any abilities that triggered on attackers being declared go on the stack. (See rule 410, “Handling Triggered Abilities.”) Then the active player gets priority and players may play spells and abilities.
Example: Tanglewalker reads, “Creatures you control are unblockable as long as defending player controls an artifact land.” Whether a creature you control is unblockable depends only on whether the player being attacked by it controls an artifact land.
Example: Guiltfeeder reads, in part, “Whenever Guiltfeeder attacks and isn’t blocked, defending player loses 1 life for each card in his or her graveyar
d.” Only the player being attacked loses life due to Guiltfeeder’s ability.
308.2. To declare attackers, the active player follows the steps below, in order. If at any point during the declaration of attackers, the active player is unable to comply with any of the steps listed below, the declaration was illegal; the game returns to the moment before the declaration (see rule 422, “Handling Illegal Actions,” and rule 500, “Legal Attacks and Blocks”).
308.2a The active player either chooses to not attack, or chooses one or more creatures he or she controls and then determines whether this set of creatures could attack. Only creatures can attack, and the following creatures can’t attack: tapped creatures (even those that can attack without tapping) and creatures the active player didn’t control continuously since the beginning of the turn (except those with haste). Other effects may also affect whether or not a set of creatures could attack. (See rule 500, “Legal Attacks and Blocks.”)