by MS
One local area network (LAN) connection is available for each network adapter installed. These connections are created automatically. To configure static IP addresses for a particular connection, complete the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection you want to work with and then select Properties.
In the Local Area Connection Status dialog box, click Properties. This displays the Local Area Connection Properties dialog box.
Double-click Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) as appropriate for the type of IP address you are configuring.
For an IPv6 address, do the following:
q Click Use The Following IPv6 Address and then type the IPv6 address in the IPv6 Address text box. The IPv6 address you assign to the computer must not be used anywhere else on the network.
q Press the Tab key. The Subnet Prefix Length field ensures that the computer communicates over the network properly. Windows Vista should insert a default value for the subnet prefix into the Subnet Prefix Length text box. If the network doesn't use variable-length subnetting, the default value should suffice, but if it does use variable-length subnets, you'll need to change this value as appropriate for your network.
For an IPv4 address, do the following:
q Click Use The Following IP Address and then type the IPv4 address in the IP Address text box. The IPv4 address you assign to the computer must not be used anywhere else on the network.
q Press the Tab key. The Subnet Mask field ensures that the computer communicates over the network properly. Windows Vista should insert a default value for the subnet prefix into the Subnet Mask text box. If the network doesn't use variable-length subnetting, the default value should suffice, but if it does use variable-length subnets, you'll need to change this value as appropriate for your network.
If the computer needs to access other TCP/IP networks, the Internet, or other subnets, you must specify a default gateway. Type the IP address of the network's default router in the Default Gateway text box.
DNS is needed for domain name resolution. Type a preferred address and an alternate DNS server address in the text boxes provided.
When you're finished, click OK twice and then click Close. Repeat this process for other network adapters and IP protocols you want to configure.
With IPv4 addressing, configure WINS as necessary, following the technique outlined in the "Configuring WINS Resolution" section of this chapter.
Configuring Dynamic IP Addresses and Alternate IP Addressing
Although static IP addresses can be used with workstations, most workstations use dynamic or alternative IP addressing, or both. You configure dynamic and alternative addressing by completing the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection you want to work with and then select Properties.
In the Local Area Connection Status dialog box, click Properties. This displays the Local Area Connection Properties dialog box, shown in Figure 12-4.
Note
In the Local Area Connection Status dialog box, one LAN connection is shown for each network adapter installed. These connections are created automatically. If you don't see a LAN connection for an installed adapter, check the driver for the adapter. It might be installed incorrectly.
Double-click Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) as appropriate for the type of IP address you are configuring.
Select Obtain An IPv6 Address Automatically or Obtain An IP Address Automatically as appropriate for the type of IP address you are configuring. If desired, select Obtain DNS Server Address Automatically. Or select Use The Following DNS Server Addresses and then type a preferred and alternate DNS server address in the text boxes provided.
When you use dynamic IPv4 addressing with desktop computers, you should configure an automatic alternative address. To use this configuration, on the Alternate Configuration tab, select Automatic Private IP Address. Click OK twice, click Close, and then skip the remaining steps.
When you use dynamic IPv4 addressing with mobile computers, you'll usually want to configure the alternative address manually. To use this configuration, on the Alternate Configuration tab, select User Configured. Then in the IP Address text box, type the IP address you want to use. The IP address that you assign to the computer should be a private IP address, as shown in Table 12-3, and it must not be in use anywhere else when the settings are applied.
With dynamic IPv4 addressing, complete the alternate configuration by entering a subnet mask, default gateway, DNS, and WINS settings. When you're finished, click OK twice and then click Close.
Note
You'll find more detailed information on configuring laptops in the "Configuring Networking for Laptops" section of Chapter 7, "Managing Laptops and Traveling Users."
Configuring Multiple Gateways
To provide fault tolerance in case of a router outage, you can choose to configure Windows Vista computers so that they use multiple default gateways. When multiple gateways are assigned, Windows Vista uses the gateway metric to determine which gateway is used and at what time. The gateway metric indicates the routing cost of using a gateway. The gateway with the lowest routing cost, or metric, is used first. If the computer can't communicate with this gateway, Windows Vista tries to use the gateway with the next lowest metric.
The best way to configure multiple gateways depends on the configuration of your network. If computers use DHCP, you'll probably want to configure the additional gateways through settings on the DHCP server. If computers use static IP addresses or you want to set gateways specifically, assign them by completing the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection you want to work with and then select Properties.
In the Local Area Connection Status dialog box, click Properties. This displays the Local Area Connection Properties dialog box, shown in Figure 12-4.
Double-click Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) as appropriate for the type of IP address you are configuring.
Click Advanced to open the Advanced TCP/IP Settings dialog box, shown in Figure 12-5.
Figure 12-5: Use the Advanced TCP/IP Settings dialog box to configure multiple IP addresses and gateways.
The Default Gateways panel shows the current gateways that have been manually configured (if any). You can enter additional default gateways as necessary. Click Add and then type the gateway address in the Gateway text box.
By default, Windows Vista automatically assigns a metric to the gateway. You can also assign the metric manually. To do this, clear the Automatic Metric check box and then enter a metric in the text box provided.
Click Add and then repeat steps 6–8 for each gateway you want to add.
Click OK three times and then click Close.
Configuring DNS Resolution
DNS is a host name resolution service that you can use to determine the IP address of a computer from its host name. This enables users to work with host names, such as http://www.msn.com or http://www.microsoft.com, rather than an IP address, such as 192.168.5.102 or 192.168.12.68. DNS is the primary name service for Windows Vista and the Internet.
As with gateways, the best way to configure DNS depends on the configuration of your network. If computers use DHCP, you'll probably want to configure DNS through settings on the DHCP server. If co
mputers use static IP addresses or you want to specifically configure DNS for an individual user or system, you'll want to configure DNS manually.
Basic DNS Settings
You can configure basic DNS settings by completing the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection you want to work with and then select Properties.
In the Local Area Connection Status dialog box, click Properties. This displays the Local Area Connection Properties dialog box, shown in Figure 12-4.
Double-click Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) as appropriate for the type of IP address you are configuring.
If the computer is using DHCP and you want DHCP to specify the DNS server address, select Obtain DNS Server Address Automatically. Otherwise, select Use The Following DNS Server Addresses and then type primary and alternate DNS server addresses in the text boxes provided.
Click OK twice and then click Close.
Advanced DNS Settings
You configure advanced DNS settings using the DNS tab of the Advanced TCP/IP Settings dialog box, shown in Figure 12-6. You use the fields of the DNS tab as follows:
DNS Server Addresses, In Order Of Use Use this area to specify the IP address of each DNS server that is used for domain name resolution. Click Add if you wish to add a server IP address to the list. Click Remove to remove a selected server address from the list. Click Edit to edit the selected entry. You can specify multiple servers for DNS resolution. Their priority is determined by the order. If the first server isn't available to respond to a host name resolution request, the next DNS server on the list is accessed, and so on. To change the position of a server in the list box, select it and then use the Up or Down arrow button.
Append Primary And Connection Specific DNS Suffixes Normally, this option is selected by default. Select this option to resolve unqualified computer names in the primary domain. For example, if the computer name Gandolf is used and the parent domain is http://www.microsoft.com, the computer name would resolve to http://www.gandolf.microsoft.com. If the fully qualified computer name doesn't exist in the parent domain, the query fails. The parent domain used is the one set in the System Properties dialog box on the Computer Name tab. (Double-click System in Control Panel and then click the Computer Name tab to check the settings.)
Append Parent Suffixes Of The Primary DNS Suffix This option is selected by default. Select this option to resolve unqualified computer names using the parent/child domain hierarchy. If a query fails in the immediate parent domain, the suffix for the parent of the parent domain is used to try to resolve the query. This process continues until the top of the DNS domain hierarchy is reached. For example, if the computer name Gandolf is used in the http://www.dev.microsoft.com domain, DNS would attempt to resolve the computer name to http://www.gandolf.dev.microsoft.com. If this didn't work, DNS would attempt to resolve the computer name to http://www.gandolf.microsoft.com.
Append These DNS Suffixes (In Order) Select this option to set specific DNS suffixes to use rather than resolving through the parent domain. Click Add if you want to add a domain suffix to the list. Click Remove to remove a selected domain suffix from the list. Click Edit to edit the selected entry. You can specify multiple domain suffixes, which are used in order. If the first suffix doesn't resolve properly, DNS attempts to use the next suffix in the list. If this fails, the next suffix is used, and so on. To change the order of the domain suffixes, select the suffix and then use the Up or Down arrow button to change its position.
DNS Suffix For This Connection This option sets a specific DNS suffix for the connection that overrides DNS names already configured for use on this connection. Instead, you'll usually set the DNS domain name through the System Properties dialog box on the Computer Name tab.
Register This Connection's Addresses In DNS Select this option if you want all IP addresses for this connection to be registered in DNS under the computer's fully qualified domain name. This option is selected by default.
Dynamic DNS updates are used in conjunction with DHCP to enable a client to update its A (Host Address) record if its IP address changes, and to enable the DHCP server to update the PTR (Pointer) record for the client on the DNS server. DHCP servers can also be configured to update both the A and PTR records on the client's behalf. Dynamic DNS updates are only supported by BIND 5.1 or higher DNS servers as well as Microsoft Windows 2000 Server, Microsoft Windows Server 2003, and later server versions of Windows. Microsoft Windows NT Server 4 doesn't support this feature.
Use This Connection's DNS Suffix In DNS Registration Select this option if you want all IP addresses for this connection to be registered in DNS under the parent domain.
Figure 12-6: Use the DNS tab of the Advanced TCP/IP Settings dialog box to configure advanced DNS settings.
Configuring WINS Resolution
You use WINS to resolve network basic input/output system (NetBIOS) computer names to IPv4 addresses. You can use WINS to help computers on a network determine the address of other computers on the network. If a WINS server is installed on the network, you can use the server to resolve computer names. Although WINS is supported on all versions of Windows, Windows Vista primarily uses WINS for backward compatibility.
You can also configure Windows Vista computers to use the local file LMHOSTS to resolve NetBIOS computer names. However, LMHOSTS is consulted only if normal name resolution methods fail. In a properly configured network, these files are rarely used. Thus, the preferred method of NetBIOS computer name resolution is WINS in conjunction with a WINS server.
As with gateways and DNS, the best way to configure WINS depends on the configuration of your network. If computers use DHCP, you'll probably want to configure WINS through settings on the DHCP server. If computers use static IPv4 addresses or you want to configure WINS specifically for an individual user or system, you'll want to configure WINS manually.
You can manually configure WINS by completing the following steps:
Access the Advanced TCP/IP Settings dialog box and click the WINS tab. This displays the WINS Address, In Order of Use window, shown in Figure 12-7.
Figure 12-7: Use the WINS tab of the Advanced TCP/IP Settings dialog box to configure WINS resolution for NetBIOS computer names.
The WINS Addresses, In Order Of Use panel enables you to specify the IPv4 addresses of each WINS server that is used for NetBIOS name resolution. Click Add if you want to add a server IPv4 address to the list. Click Remove to remove a selected server from the list. Click Edit to edit the selected entry.
You can specify multiple servers, which are used in order, for WINS resolution. If the first server isn't available to respond to a NetBIOS name resolution request, the next WINS server on the list is accessed, and so on. To change the position of a server in the list box, select it and then use the Up or Down arrow button.
To enable LMHOSTS lookups, select the Enable LMHOSTS Lookup check box. If you want the computer to use an existing LMHOSTS file defined somewhere on the network, retrieve this file by clicking Import LMHOSTS. You generally will use LMHOSTS only when other name resolution methods fail.
WINS name resolution requires NetBIOS Over TCP/IP services. Select one of the following options to configure WINS name resolution using NetBIOS:
q If you use DHCP and dynamic addressing, you can get the NetBIOS setting from the DHCP server. Select Default: Use NetBIOS Setting From The DHCP Server.
q If you use a static IP address or the DHCP server does not provide NetBIOS settings, select Enable NetBIOS Over TCP/IP.
q If WINS and NetBIOS are not used on the network, select Disable NetBIOS Over TCP/IP. This eliminates the NetBIOS broadcasts that would otherwise be sent by the computer.
Click OK three times and then click Close. As ne
cessary, repeat this process for other network adapters.
Tip
LMHOSTS files are maintained locally on a computer-by-computer basis, which can eventually make them unreliable. Rather than relying on LMHOSTS, ensure that your DNS and WINS servers are configured properly and are accessible to the network for centralized administration of name resolution services.
Managing Local Area Connections
Local area connections make it possible for computers to access resources on the network and the Internet. One local area connection is created automatically for each network adapter installed on a computer. This section examines techniques you can use to manage these connections.
Enabling and Disabling Local Area Connections
Local area connections are created and connected automatically. If you want to disable a connection so that it cannot be used, complete the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection and select Disable to deactivate the connection and disable it.
Later, if you want to enable the connection, right-click the connection in Network Connections and select Enable.
If you want to disconnect from a network or start another connection, complete the following steps:
Click Start and then click Network. In Network Explorer, click Network And Sharing Center on the toolbar.
In Network And Sharing Center, click Manage Network Connections.
In Network Connections, right-click the connection and select Disconnect. Typically, only remote access connections have a Disconnect option.
Later, if you want to activate the connection, right-click the connection in Network Connections and select Connect.
Checking the Status, Speed, and Activity for Local Area Connections
To check the status of a local area connection, follow these steps:
